《NetBSD指南-15.2.配置内核支持》
发表于 : 2010-03-02 22:30
下面的内核配置指令是支持CCD设备必需的。 在GENERIC内核里已经启用了:
在我的内核配置里, 我也硬编码将SCSI ID关联到 /dev 设备项以防止发生意外:
代码: 全选
pseudo-device ccd 4 # concatenated disk devicessd0 at scsibus0 target 0 lun ?
# SCSI disk drives
sd1 at scsibus0 target 1 lun ?
# SCSI disk drives
sd2 at scsibus0 target 2 lun ?
# SCSI disk drives
sd3 at scsibus0 target 3 lun ?
# SCSI disk drives
sd4 at scsibus0 target 4 lun ?
# SCSI disk drives
sd5 at scsibus0 target 5 lun ?
# SCSI disk drives
sd6 at scsibus0 target 6 lun ?
# SCSI disk drives